OMNIA Partners Blog

A Clean Workplace is a Safe Workplace

Posted by Batteries Plus Bulbs on July 22, 2020


A clean workplace is a safer workplace, and functioning, reliable floor care machinery plays a big part in keeping your space free from dirt and clutter. Many companies recognize the importance and value of owning proper floor cleaning equipment and have made that investment. However, in order to gain the optimal ROI from your equipment, maintenance measures must be taken. So what are the recommended steps for maintaining your floor cleaning equipment? Here are some easy tips and tricks!

 

Scrubber Battery Charging & Maintenance

Many people aren’t aware of how old their scrubber batteries are, or how much life is left in them. Problem solved! The experts at Batteries Plus Bulbs will test your batteries for free. If you find you need replacements, you’ll find a great selection of reliable, brand name scrubber batteries for you to choose from.

Beyond this, there are myriad other ways to care for and maintain your floor care machinery.

 

Scrubber Battery Tips & Tricks

  • Check your battery connections for worn or loose terminals and replace them if necessary.
  • Keep all battery tops and terminals free of corrosion by cleaning them with a solution of baking soda and water and a wire brush. Don’t let the solution seep into the battery cells.
  • Use only chargers with: Automatic shut-off circuit, Deep cycle charging, Output amps: 9-20A, Output voltage: 24V.
  • To avoid sparks, plug the charger into the connector of the battery pack, then plug the charger into the grounded wall outlet. The charger will automatically begin to charge the batteries and will automatically shut down once the batteries have been fully charged.
  • For flooded batteries, always charge the machine after refilling the battery with water. (More on that later.) After charging, unplug the charger from the wall outlet first, then disconnect the charger from the machine. Check the battery fluid level after charging is complete. Replace caps. Plug in battery pack.
  • Only recharge the batteries after a total of 30 minutes of use or more. Be sure to keep the battery charged at all times. Storing it in a discharged condition can hurt the battery’s overall life.

Many floor scrubber batteries require water. As a matter of fact, low water levels are the leading cause of battery failure. To properly fill your scrubber battery, fill the battery cells with distilled water ¼-inch above the battery plates. Do not overfill. Note that VRLA scrubber batteries do not need filling.

 

Beyond the Battery: Other Maintenance Requirements

A little effort each time you clean will keep your machines in great working order.

  • Recovery tanks should be emptied and rinsed after each use to prevent odor and build-up. Then, clean your shut-off filters and leave lids off so that they can thoroughly air dry.
  • Empty your solution tanks with every use. Leaving solution in the tanks can clog filters and affect performance.
  • Brushes and/or pads should be cleaned and rinsed after each use.
  • Vacuum ports and squeegees should be cleaned after use, and before they dry out. (Poorly maintained squeegees won’t properly dry your floor, which can be dangerous for customers and employees.)
  • Jets should be maintained regularly so that they spray evenly. Pro Tip: Soak them in a mixture of vinegar and water overnight to keep mineral deposits at bay.

Of course, you should reference your owner’s manual for further information and maintenance suggestions for your particular machine. In general, though, keeping your scrubber or sweeper clean and powered up is a good place to start.

 

Batteries Plus Bulbs offers a wide selection of high-quality, reliable scrubber & sweeper batteries from the brands you trust through OMNIA Partners. We’d love to help with your business floor care needs. Visit the Batteries Plus Bulbs site to learn more.

Topics: Facilities, Lighting, batteries, Industrial Supplies

Subscribe to Our Blog

Recent Posts

Posts by Tag

see all