Power. Access. Trust.

REGISTER
    Industry Insights

    The 7 Best Ways to Improve Nighttime Pedestrian Safety

    Posted by Traffic & Parking Control Co., Inc. (TAPCO) on October 28, 2019


    TAPCO-blog-header

    Between 2007 and 2016, pedestrian deaths increased by a whopping 27 percent in the U.S., with 75 percent of those deaths occurring in the dark and 70 percent occurring at non-intersections, according to a study by the National Highway Traffic Safety Administration (NHTSA). Though pedestrian deaths have lowered slightly since 2016, multiple reports have found the number still hovers near 6,000.

    Interestingly, traffic fatalities for occupants inside vehicles decreased by 14% in that same ten-year period. Essentially, our vehicles have become safer, but our roads have gotten more dangerous for pedestrians. And, of course, the risks go up as visibility goes down.

    Solutions like streetlights, static signs and freshly painted crosswalks aren’t enough because motorists frequently don’t notice or obey them. Fortunately, there are more innovative, life-saving steps you can take to drastically improve nighttime pedestrian safety.

    Here at OMNIA Partners, we understand that pedestrian safety is a huge concern. That's why we've partnered with TAPCO to bring innovative safety solutions to your community. By utilizing TAPCO's nationwide cooperative contract that was competitively solicited and publicly awarded, you'll gain access to cost-effective solutions that improve safety for all. 

    Capture

     

    7 Ways to Improve Nighttime Pedestrian Safety

    1. Upgrade to More Reflective Signage

    Drivers can’t obey a sign they can’t see. Many traffic signs are made with outdated sheeting that doesn’t maximize reflectivity. Replace those signs with ones using highly reflective, durable, micro-prismatic lens sheeting with pressure-sensitive adhesive. They’re visible from up to 600 feet away because they reflect more available light, drastically increasing sign visibility and compliance. This is helpful for any type of sign, but especially for those placed in areas with lots of foot traffic. If you’re not sure if your signs meet reflectivity standards, invest in a quality retroreflectometer.

     

    2. Replace Static Signs with Flashing LED Signs

    downloadIf static signs – no matter how reflective – aren’t enough, leverage the BlinkerSign® Pedestrian Crosswalk System, which features signs with flashing solar- or electric-powered LEDs embedded into the sides. With the LEDs, the signs are much easier to see, particularly at night and during adverse weather conditions, such as fog and heavy rain.

    Plus, these signs can be programmed to flash 24/7, at scheduled times or only when a pedestrian is approaching, thanks to new low-power thermal detector technology that can be mounted on the sign.

    Increase the rate at which motorists’ look out for and yield to pedestrians by placing these attention-grabbing signs in high-risk areas, like crosswalks near parks and schools.

     

    3. Leverage RRFB Technology

    Another innovative way to increase nighttime pedestrian detection is with a Rectangular Rapid-Flashing Beacon (RRFB) Pedestrian Crosswalk System. According to a study by the Federal Highway Administration (FHWA), they can bring motorists’ yield rate up to 90 percent. Look for FHWA-approved ones with dimmable LED warning lights with an alternating WW+S (wig-wag and simultaneous) flash pattern.

    Ideal for uncontrolled crossings and high-speed and multi-lane roads, RRFBs can be activated via user-actuation or passive detection activation using directional bollards or thermal technology.

     

    4. Install a Crosswalk Illuminator

    A simple solution to lack of visibility at night is to add light, but it’s important to add the right kind of light. Streetlights beam light down on small sections of road, often not reaching the middle where pedestrians are furthest from safety.

    For two-lane crossings, consider adding the SafeWalk™ Crosswalk Illuminator in tandem with LED-enhanced signs or RRFBs. They use a flood light to illuminate the approach area of the crosswalk and a beam light to illuminate the middle, ensuring motorists’ can easily see pedestrians. Crucially, activation can happen concurrently with LED-enhanced warning alerts and be either passively activated via thermal detection or user-actuated. This conserves energy and prevents the lights from becoming “white noise” to motorists.

    Illuminators are especially great for increasing pedestrian visibility at night in frequently visited areas, such as transportation stops, libraries, parks and shopping areas.

    Be sure to look for one with minimal glare and a 20 LUX minimum – as recommended by the FHWA – that can be retrofitted if necessary.

     

    5. Give Pedestrians a Head Start

    If none of these lighting-related methods work for you, concentrate on minimizing the time pedestrians and motorists interact. At intersections with traffic and pedestrian crossing signals, create a Leading Pedestrian Interval, a short interval for pedestrians to start crossing before motorists’ signal changes to green. It’s a relatively simple and cost-effective solution that considerably reduces conflicts between pedestrians and turning vehicles.

    For added protection, install a “No Turn On Red” sign as well so motorists are less likely to enter crosswalks while slower pedestrians still occupy them.

     

    6. Focus On Left-Turn Collisions

    Left turns are the cause of most intersection-related accidents, according to the NHTSA, even outnumbering right turn crashes in heavily congested city streets. This poses a major threat to pedestrians – especially at night – because left-turning drivers are often distracted by watching oncoming traffic, only looking out for pedestrians as “an afterthought,” states the Oregon Transportation Research and Education Consortium (OTREC).

    Add a traffic signal with a green arrow for left turners, providing them with a protected right of way for a short time when pedestrians are not permitted to enter the crosswalk. The “green light for all” method may seem most efficient, but nighttime pedestrian safety must come first.

     

    7. Redesign Your Roadway

    If none of these solutions are the right fit for a problem area in your community, you may need to redesign the area entirely. Look into solutions like raised crosswalks, road diets, pedestrian crossing islands and curb extensions. Then, consult with other experts to determine what makes the most sense for the problem area’s unique challenges.

    While pedestrian safety is top of mind for many, tight budgets and competing priorities often get in the way. Don’t let them. Identify the right nighttime pedestrian safety solutions for the right places in your community by doing your research and working with reputable providers — so no one else becomes a statistic.


     

    These solutions are included on TAPCO's competitively solicited and publicly awarded cooperative contract, available through OMNIA Partners. For full contract documentation, please visit www.omniapartners.com/publicsector.

    This blog was originally posted on TAPCO's blog here.

    Topics: Public Safety, Public Works, Pedestrian Safety